Amtech A2311 Wooden Hoe Handle Replacement, Beech, 47” (1175mm Long)

Product Information

If your spade has a T-handle, begin by removing the screws that hold the old handle in place. With those screws out, gently pull on the old handle until it comes free from the shaft.

Hoe Handle - HandyTooler How to Replace a Garden Hoe Handle - HandyTooler

Start by making a small notch in one end of the dowel; this will help keep the hoe from slipping out of your hand while you’re working. Then, use a file or knife to gradually taper down each side of the notch until it forms a sharp point. Finally, use sandpaper to smooth down any rough edges. Next, drive the new handle into place. If necessary, tap it gently with a hammer to get it started. shorter handled tools, or with short versions used in other parts of the world. We will explain below...

Wholesalers of Handles

The height of your hoe handle should be between your armpit and shoulder. Our hoe handles are designed to allow it to be

Replacement Wooden Handles, Hoe Handle, Hickory Axe Handle

We bought 16 different makes and models of hoe and used them in a garden and at an allotment between spring and autumn. Having the right handle length is important. A minimum handle length of 160cm is best if you're more than 1.8 metres tall, 145cm if you're 1.65-1.75 metres tall, and 135cm if you're 1.55-1.60 metres. Unscrew the fasteners that hold the old handle in place. This will usually be a screw or nail at the top and bottom of the handle.Cut a new piece of wood to size, making sure it is slightly longer than the old handle so that there is room for adjustment later on.